.webp?w=1600&h=1600&q=80)
.webp?w=1600&h=1600&q=80)
-1.webp?w=1018&h=969&q=80)
_1445x.webp?w=1600&h=1600&q=80)
_1445x.webp?w=1600&h=1600&q=80)
-1_1445x.webp?w=1018&h=969&q=80)
_1800x.webp?w=1600&h=1600&q=80)
_1800x.webp?w=1600&h=1600&q=80)
-1_1800x.webp?w=1018&h=969&q=80)
Official XOD H800/H880 Upgrade Kit for Joyor
Unleash your Joyor's ultimate stopping power. Custom-tailored for your exact scooter model, this H-Series hydraulic system replaces weak mechanical parts to give you absolute control. Select your exact Model and choose your Position (Front, Rear, or Full Set) to complete your build.
Why Upgrade Your Joyor?
- 🎯 100% Joyor Fit: Engineered exclusively for Joyor S10-S-Z, T10, T6, Y6-S, and S8-S-Z.
- 💪 Dual-Piston Power: Massive clamping force for instant, safe stops on all terrains.
- 🛑 Zero Brake Fade: Say goodbye to mechanical brake fade. Ride safer and brake harder.
- ⚡ Plug & Play: 2-Pin power-off sensors designed for high-speed riders. Fast and direct bolt-on installation.
⚙️ Technical Specifications +
- Sensor Plug: 2-PIN waterproof plug
- Pistons: 2 Pistons
- Material: Forged Aluminum Alloy
- Cable Length: Power-off wire 20cm
- Tubing Length: Front 1350mm / Rear 2100mm
- Rotor Size: 140mm / 160mm
- Weight: Approx. 1 kg (per set)
Mounting Types (Crucial):
A-Type (Positive): XD-H800 Mounted on the Right / XD-H880 Mounted on the Left.
B-Type (Reverse): Only for the Front Brake of specific E-scooters.
*Please check your scooter's caliper mount before ordering.
⚠️ Important Purchase Notes +
1. Default Lever Setup:
By default, the Left Lever controls the Rear Brake, and the Right Lever controls the Front Brake. If you need a custom setup, please contact us immediately after ordering. Alternatively, before installation, you can swap the hydraulic lines for the front and rear XOD brakes to configure the right brake lever to control the rear brake.
2. Installation Experience:
This kit requires DIY installation. While pre-bled, handling hydraulic lines requires care (do not let mineral oil leak). If you lack experience, we strongly advise seeking help from a professional bike mechanic.
Brake modifications on Joyor scooters typically require 6-Hole Disc Brake Washers (Spacers). We offer 2mm/3mm/4mm/5mm aluminum alloy spacers (BCD: 44mm). Please measure and add the correct size to your cart.
❓ Frequently Asked Questions +
Q1: Does this fit my Joyor model?
Yes, the XOD H800/H880 kit is perfectly compatible with Joyor S10-S-Z, T10, T6, Y6-S, and S8-S-Z. Choose the correct "Position" (Front/Rear/Set) from the options above.
Q2: Can I ride in the rain?
Absolutely. The calipers and brake handles feature a fully sealed, waterproof, and dustproof design, making them perfect for wet off-road trails.
Q3: Which kit should I choose?
If you are unsure whether you need an A-Type or B-Type mount, or which spacer thickness you require, please contact our support team with a photo of your current scooter brakes. We'll guide you to the right choice!
Q4: Does the package include brake pads?
Yes, brake pads are included by default and come pre-installed. Please note that you may hear some unusual noise during the initial use of the brake pads. This is a normal occurrence; since the pads are brand new, they require a break-in period of approximately 10 kilometers, after which the noise will gradually subside.